How to Install a Rare Breed Trigger – Step-by-Step Guide

Installing a Rare Breed Trigger can significantly enhance your shooting experience by increasing your rifle’s firing speed while maintaining compliance with firearm regulations. Whether you’re a seasoned firearm enthusiast or a first-time installer, this step-by-step guide will help you correctly and safely install your Rare Breed Trigger.

What You Need Before Installation

Before you begin the installation process, gather the necessary tools and components:

• Rare Breed Trigger
• Compatible AR-15 lower receiver
• Punch set
• Hammer
• Armorer’s wrench
• Safety glasses
• Gun vise or stable workbench
• Lubricating oil

Step-by-Step Installation Process

Step 1: Ensure Safety First

Safety should always be your top priority when working with firearms. Before installation:

1. Unload Your Firearm – Remove any ammunition and ensure the chamber is clear.
2. Disassemble the Lower Receiver – Separate the upper and lower receivers by pushing out the takedown and pivot pins.
3. Wear Safety Glasses – Protect your eyes from any accidental spring releases.

Step 2: Remove the Existing Trigger Group

To install the Rare Breed Trigger, you must first remove the standard trigger assembly:

1. Use a punch and hammer to carefully drive out the trigger and hammer pins.
2. Remove the standard trigger, hammer, and disconnector.
3. Keep the pins and springs aside for potential future use.

Step 3: Install the Rare Breed Trigger

Now that you have removed the stock trigger, proceed with installing the Rare Breed Trigger:

1. Position the FRT Unit – Align the Rare Breed Trigger within the lower receiver.
2. Insert the Trigger Pins – Secure the FRT unit using the hammer and trigger pins.
3. Ensure Proper Seating – Double-check that the trigger is seated correctly and moves freely within the receiver.

Step 4: Reassemble the Firearm

1. Reattach the upper receiver to the lower receiver.
2. Secure the pivot and takedown pins back into place.
3. Apply lubricating oil to key moving parts to ensure smooth operation.

Step 5: Function Test the Trigger

Before using your firearm, it’s crucial to perform a function test:

1. Check the Reset Mechanism – Cock the hammer and pull the trigger to ensure proper engagement.
2. Confirm the Safety Selector Works – Move the selector switch between “Safe” and “Fire” to verify it functions correctly.
3. Perform a Dry-Fire Test – Dry-fire the rifle to test the forced reset functionality.

Troubleshooting Common Issues

If your Rare Breed Trigger does not function as expected, consider these troubleshooting steps:

• Trigger Not Resetting Properly? Ensure the trigger springs are correctly installed and not obstructed.
• Excessive Resistance When Pulling the Trigger? Apply lubrication to the necessary components.
• Hammer Failing to Engage? Double-check that the trigger pins are securely in place.

Final Thoughts

Installing a Rare Breed Trigger can elevate your shooting performance, providing a faster and more efficient firing experience. By following this guide, you can ensure a smooth and safe installation process. If you encounter any difficulties, consult a certified gunsmith or refer to the manufacturer’s instructions.

For high-quality Rare Breed Triggers and other firearm components, visit ForcedResetTrigger.net today!